Medium Cut System
The Americana Global Medium Cut compound is infused with the most advanced Diminishing Abrasive Technology available to professional detailers today. Our Medium Cut Compound was designed for maximum defect removal, longer product cycling, and impeccable finishing capabilities.
Our Medium Cut uses the same proven diminishing abrasive technology as our previously branded 1500 compound. As the compound is worked into the clear coat, the abrasives slowly break down into smaller particles – which produces a fast, yet gentle cutting action.
The end result – is a compound that produces less micro-marring and creates a quicker finishing step. It’s a water-based compound, that produces less dust than previous formulations, with superior cutting control, and exceptional finishing abilities. This makes the Medium Cut Compound more eco-friendly, and compliant with evolving EPA regulations.
2. Correct
State-of-the-Art compounds and polishes – paired perfectly with the right cutting or finishing pad to achieve a flawless finish.
TASK
Diminishing Abrasive Cutting Compound – For removing 1500-grit medium scratches, swirl marks, and paint imperfections. Pairs exceptional with Americana Global Purple Hybrid Cutting Pad, Microfiber, Yellow Heavy Cut Foam Pad, and Orange Medium Cut Foam Pad. Can be used with orbital or rotary polishing machines.
SIZE:
16oz, 32oz & 1-Gallon Container
Application
This rapid cut and low dust formula are best paired with Americana Global Crazy Cut Hybrid Cutting Pads, Microfiber, or Max Cut Yellow Foam Pads & Medium Cut Orange Pads.
- Shake well before use.
- Always prime the pad prior to starting your correction.
- Use 4-6 pea size drops per 2-foot by 2-foot section.
- Spread the Medium Cut compound across the entire working area before engaging the buffer.
- Maintain a slow tempo and arm speed, with minimal pressure applied.
- Do NOT BUFF the product until it is dry. Keep the surface area wet.
- Remove residue with a clean microfiber towel.
WARNING: DO NOT SWALLOW. If ingested, please seek medical attention immediately.
LOW DUST FORMULATION
One of the drawbacks of most diminishing abrasives compounds is the excessive dust produced during the working cycle. Our proprietary formulation helps to reduce the amount of dust created. This not only helps to keep your work area clean but reduces cross contamination – especially when you apply a professional ceramic coating or paint protection film.
ONE STEP FOR MINOR IMPERFECTIONS
The Americana Global Medium Cut Compound is an exceptional single-stage solution for those factory-direct delivered vehicles seeking ceramic coatings or paint protection film. This compound also contains polishing oils and lubricants that helps to produce a superior finish. When paired with our Orange Medium Cut Foam Pad, it removes micro-swirls and paint imperfections, while polishing the surface to leave a superior shine.
DEEP SHINE, DEPTH & GLOSS
The Americana Global Paint Correction System is intended to provide time-strapped detailers with a process that produces deep shine, depth, and gloss their customer’s demand. This Medium Cut compound works great on hard or soft clear coats, gel coats, and aerospace paints.
THE AMERICANA GLOBAL PAINT CORRECTION SYSTEM
We’ve formulated our compounds and polishes to work in conjunction with Americana Global’s proprietary cutting and finishing pads. The Medium Cut Compound pairs exceptional with Americana Global Purple Hybrid Cutting Pad, Microfiber, Yellow Heavy Cut Foam Pad, and Orange Medium Cut Foam Pad. For optimal results, we recommend using this system with dual action orbital buffing machines.
